Austenitic Stainless Steel.
The matrix is primarily composed of austenitic structure (γ phase) with a face-centered cubic crystal structure, which is non-magnetic, and strengthening can be achieved mainly through cold working (which may also result in some magnetism). The American Iron and Steel Institute (AISI) designates these with numbers in the 200 and 300 series, such as 304.
Ferritic Stainless Steel.
The matrix is primarily composed of ferritic structure ((α phase) with a body-centered cubic crystal structure, which is magnetic, and generally cannot be hardened through heat treatment, but can be slightly strengthened by cold working. The AISI designations are 430 and 446.
Martensitic Stainless Steel.
The matrix is primarily composed of martensitic structure (body-centered cubic or cubic), which is magnetic, and its mechanical properties can be adjusted through heat treatment. The AISI designations are 410, 420, and 440. Martensitic stainless steel has an austenitic structure at high temperatures, and when cooled to room temperature at an appropriate rate, the austenitic structure can transform into martensite (i.e., hardening).
Austenitic-Ferritic (Duplex) Stainless Steel.
The matrix has both austenitic and ferritic structures, with the content of the minor phase generally greater than 15%. It is magnetic and can be strengthened by cold working. 329 is a typical duplex stainless steel. Compared to austenitic stainless steel, duplex steel has higher strength and significantly improved resistance to intergranular corrosion, stress corrosion cracking, and pitting.
Precipitation Hardening Stainless Steel.
The matrix is primarily composed of austenitic or martensitic structures and can be hardened through precipitation hardening treatment. The AISI designates these with numbers in the 600 series, such as 630, which is 17-4PH.
Generally speaking, apart from certain alloys, austenitic stainless steel has superior corrosion resistance. In environments with low corrosiveness, ferritic stainless steel can be used. In mildly corrosive environments, if high strength or hardness is required, martensitic stainless steel and precipitation hardening stainless steel can be employed.






