Home > Knowledge > Content

The main factor of stainless steel corrosion

Oct 29, 2024

What kind of stainless steel is less prone to rusting?

The main factors affecting the corrosion of stainless steel are threefold:

The content of alloying elements.

Generally speaking, if the chromium content is above 10.5%, the steel is less likely to rust. The higher the content of chromium and nickel, the better the corrosion resistance. For example, 304 material contains 8-10% nickel and 18-20% chromium, which makes this type of stainless steel resistant to rust under normal circumstances.

The smelting process of the manufacturing enterprise also affects the corrosion resistance of stainless steel.

Large stainless steel factories with advanced smelting technology, modern equipment, and sophisticated processes can ensure the control of alloying elements, the removal of impurities, and the control of the cooling temperature of the steel ingot, thus ensuring stable and reliable product quality, good intrinsic quality, and resistance to rust. On the contrary, some smaller steel mills with outdated equipment and processes cannot remove impurities during smelting, and the products they produce are inevitably prone to rust.

External environment, dry and well-ventilated environments are less likely to rust.

Environments with high air humidity, continuous rainy weather, or high levels of acid and alkali in the air are more prone to rust. Even 304 material stainless steel can rust if the surrounding environment is too poor.

How to deal with rust spots on stainless steel?

Chemical method

Use pickling paste or spray to assist the rusted areas to re-passivate and form a chromium oxide film, restoring their corrosion resistance. After pickling, it is essential to rinse thoroughly with clean water to remove all contaminants and acid residues. After all treatments, re-polish with polishing equipment and seal with polishing wax. For local minor rust spots, a mixture of gasoline and machine oil in a 1:1 ratio can be used with a clean cloth to wipe away the rust spots.

Mechanical method

Sandblasting cleaning, using glass or ceramic micro-particles for shot peening, tumbling, brushing, and polishing. Mechanical methods may remove contamination caused by previously removed materials, polishing materials, or tumbling materials. All kinds of contamination, especially foreign iron particles, can be a source of corrosion, especially in humid environments. Therefore, it is best to carry out regular cleaning under dry conditions when mechanically cleaning the surface. Mechanical methods can only clean the surface and cannot change the material's inherent corrosion resistance. Therefore, it is recommended to re-polish with polishing equipment and seal with polishing wax after mechanical cleaning.

Send Inquiry