Home > Knowledge > Content

Gear Machining Methods and Standards

Feb 27, 2025

Gear Grinding: IT6~IT4 → IT3, Ra: 0.8~0.2 µm
Principle: Form grinding and generating grinding.

Form Grinding (IT6~IT5, Ra: 0.8~0.4 µm)
Form grinding uses a formed grinding wheel to machine gears. It offers higher productivity for gear manufacturing but lower machining accuracy and is less commonly applied.

Generating Grinding
Conical Wheel Grinding: The grinding wheel has a cross-sectional tooth profile resembling an imaginary rack. The workpiece rolls to the right, using the right side of the grinding wheel to grind the right side of one tooth slot, from the root to the tip. Then, the workpiece rolls to the left, and the left side of the grinding wheel grinds the left side of the same tooth slot, also from the root to the tip. Once both sides of the first tooth slot are completely ground, the grinding wheel automatically retracts, the workpiece indexes, and then rolls to the right again to grind the second tooth slot. This process repeats until all teeth are ground.

Gear Lapping: IT7~IT6, Ra: 1.6~0.2 µm
Equipment: Gear lapping machine.
Lapping agent: Abrasive grains: 220#~240#, with active lubricating oil.
Characteristics: Similar to honing, lapping can only reduce surface roughness and cannot improve tooth profile accuracy.

Parallel Axis Lapping Method:

Process: The lapping wheel's axis is parallel to that of the gear being lapped. During lapping, the gear drives the lapping wheel in a free meshing motion without backlash. The gear also performs an axial reciprocating motion, while the lapping wheel is slightly braked. After a period, the lapping wheel and the gear rotate in the opposite direction to evenly lap both sides of the teeth.

Characteristics: Due to the uneven sliding speed of the tooth surfaces, the lapping amount is also uneven. The sliding speed and lapping amount are higher at the tip and root of the teeth.

Gear Drives with Moving Axes

Planetary gear drives come in various types, and their performance can differ significantly. Choosing the appropriate type based on operating conditions is crucial. Common types include:

Ordinary planetary transmission composed of a sun gear, planet gears, internal gear, and planet carrier.

Epicyclic gear transmission with a small tooth difference.

Cycloidal pinion transmission.

Harmonic drive transmission.

Planetary gear drives are generally composed of parallel-axis gears, characterized by their compact size and light weight. The input and output shafts can be coaxial. Their applications are becoming increasingly widespread.

Send Inquiry