Types of Cutting Machining (切削加工的种类)
Classification Overview
Cutting machining can be classified in several ways: by the nature of the main motion, by the material removal method, by the tool type, or by the intended surface. The most common industrial classification is based on the relative motion between tool and workpiece, which divides cutting into the following major categories.
1. Turning (车削)
Motion: workpiece rotates (main motion) + tool feeds linearly (feed motion)
Typical parts: shafts, discs, sleeves, cones, threads, end faces
Sub-types:
External / internal turning (facing, cylindrical turning)
Thread turning, grooving, parting-off
Form turning (with shaped tools)
Machine tools: manual lathes, CNC lathes, turning centers
2. Milling (铣削)
Motion: cutter rotates (main motion) + workpiece feeds
Typical parts: planes, steps, slots, gears, curved 3D surfaces
Sub-types by cutter axis:
Face milling – cutter axis perpendicular to the surface
Peripheral (slab) milling – cutter axis parallel to the surface
End milling – end mills for slots, pockets, profiles
By machine: vertical milling, horizontal milling, 3/4/5-axis machining centers
3. Drilling, Boring & Reaming (钻削,镗削与铰削)
Hole-making family:
| Process | Tool | Function |
|---|
| Drilling | Twist drill, U-drill | Rough hole making (IT11–IT13) |
| Boring | Single-point boring tool | Enlarging and correcting existing holes (IT7–IT9) |
| Reaming | Multi-edge reamer | Fine finishing of holes (IT6–IT8) |
| Counterboring / spot-facing | Step tools | Flat-bottomed seats for bolts |
| Gun drilling / deep-hole drilling | Long drills with coolant channels | Deep, precise holes (L/D > 10) |
4. Planing & Shaping (刨削与插削)
Motion: linear reciprocating main motion
Planing: workpiece moves on a planer – large, flat surfaces (machine beds, guideways)
Shaping: tool moves on a shaper – smaller flat surfaces and slots
Slow but simple; largely replaced by milling today, still used for large single parts
5. Broaching (拉削)
Motion: single linear pass with a multi-tooth tool (broach), each tooth removing a thin layer
Features: very high productivity and accuracy; expensive tool, needs rigid machine
Uses: internal keyways, splines, polygon holes, turbine blade root profiles
6. Grinding (磨削)
Abrasive cutting with a rotating wheel of bonded grains:
Sub-types:
Cylindrical (external/internal) grinding – precision shafts, sleeves (IT5–IT6, Ra 0.1–0.4 μm)
Surface grinding – flat surfaces on hardened parts
Centerless grinding – mass production of small pins and shafts
Creep-feed grinding – deep, slow feed for complex profiles
Role: the main finishing method for hardened steels
7. Thread & Gear Cutting (螺纹与齿轮加工)
Thread: thread turning, thread milling, thread tapping, thread rolling (forming), thread grinding (precision)
Gears: gear hobbing (滚齿), gear shaping (插齿), gear grinding (磨齿), gear honing - the core of power transmission manufacturing
8. Sawing & Cutting-Off (锯削)
Band saws, circular saws, hacksaws
Function: blank separation before machining; low precision, high material efficiency
9. Non-Traditional Cutting Processes (特种/非传统切削)
Processes using energy other than mechanical shear:
| Process | Energy Source | Typical Use |
|---|
| EDM (electrical discharge machining) | Electrical sparks | Hardened steel, complex cavities, fine slots |
| Wire EDM (线切割) | Travelling wire spark | Precise 2D profiles, punches, dies |
| ECM (electrochemical machining) | Anodic dissolution | Blades, small deep holes, no tool wear |
| Laser cutting | Focused light | Sheet metal cutting, fine contours |
| Waterjet / abrasive waterjet | High-pressure jet | Heat-sensitive materials, thick plates |
| Ultrasonic machining | Vibration + abrasives | Ceramics, glass, carbide |
Summary Table: Quick Comparison
| Process | Main Motion | Typical Accuracy | Surface Finish | Productivity |
|---|
| Turning | Workpiece rotation | IT7–IT11 | Ra 0.8–6.3 μm | High |
| Milling | Cutter rotation | IT7–IT11 | Ra 1.6–6.3 μm | High |
| Drilling | Drill rotation | IT11–IT13 | Ra 6.3–12.5 μm | Very high |
| Boring | Tool/workpiece rotation | IT7–IT9 | Ra 0.8–3.2 μm | Medium |
| Reaming | Reamer rotation | IT6–IT8 | Ra 0.4–1.6 μm | High |
| Planing/Shaping | Linear reciprocation | IT8–IT11 | Ra 3.2–12.5 μm | Low |
| Broaching | Single linear pull/push | IT6–IT8 | Ra 0.8–3.2 μm | Very high |
| Grinding | Wheel rotation | IT5–IT7 | Ra 0.05–0.8 μm | Medium |










