Methods (Modes) of Cutting Machining (切削加工的方式)
Overview
"Methods of cutting" refers to how the cutting process is carried out - different dimensions such as the machining stage, tool–workpiece engagement mode, lubrication condition, and production organization. Understanding these modes helps engineers select the right strategy for accuracy, efficiency, and cost.
1. By Machining Stage (按加工阶段划分)
The same feature is often machined in successive passes with different allowances:
| Stage | Allowance Removed | Purpose | Typical Accuracy |
|---|
| Rough machining (粗加工) | Large (several mm) | Remove most stock quickly, reveal material defects | IT11–IT13 |
| Semi-finishing (半精加工) | Medium | Prepare for finishing, correct shape errors | IT9–IT10 |
| Finishing (精加工) | Small (0.1–0.5 mm) | Achieve final size and surface quality | IT6–IT8 |
| Fine finishing (光整加工) | Micron level | Grinding, honing, lapping, polishing | IT5+, Ra ≤ 0.1 μm |
2. By Tool Engagement Direction (按刀具与工件的接触方式)
In Milling - Climb vs. Conventional (顺铣与逆铣)
Climb (down) milling (顺铣) – cutter rotation feeds in the same direction as feed. Smaller cutting force, better surface finish, longer tool life; requires backlash-free feed mechanism.
Conventional (up) milling (逆铣) – cutter opposes the feed. Safer for machines with old feed screws, but causes more vibration and wear; suitable for roughing or hard skins.
In Turning - Longitudinal vs. Transverse Feed
Longitudinal turning – tool moves parallel to the axis (cylindrical surfaces)
Facing / transverse turning – tool moves toward the center (end faces, shoulders)
Profiling – tool follows a template/CNC path for curved surfaces
3. By Lubrication & Cooling Condition (按润滑冷却方式)
Wet cutting (湿式切削) – flood coolant or emulsion; best cooling, standard for most operations
Dry cutting (干式切削) – no fluid; requires heat-resistant tools (coated carbide, ceramic), environmentally friendly
MQL – Minimum Quantity Lubrication (微量润滑) – oil mist at tens of mL/h; balances cooling and green manufacturing
Cryogenic cooling (低温切削) – liquid nitrogen/CO₂ cooling for difficult materials (titanium, superalloys)
4. By Tool Arrangement (按刀具数量与组合)
Single-tool machining – one tool per pass; flexible, common on lathes
Multi-tool machining – several tools cut simultaneously (gang tooling on Swiss lathes) – high productivity
Form tool machining (成形加工) – tool profile = part profile; one stroke completes the shape (form turning, broaching)
Modular / combined tool machining – drills, reams, chamfers in one pass
5. By Number of Setups (按装夹次数)
One-setup (single-clamp) machining – all features completed without re-clamping; best accuracy via no datum re-establishment. Achieved by turning centers (mill-turn machines) or 5-axis machining centers.
Multi-setup machining – part re-clamped several times; requires precise secondary datums; lower accuracy risk control.
Trend: reducing setups via turn-mill compound machining (车铣复合) and 5-axis simultaneous machining.
6. By Motion Control (按运动控制方式)
Manual cutting – operator-controlled; for repair and small batch
Mechanical (conventional automatic) cutting – cams and stops; rigid, for mass production
CNC cutting (数控切削) – program-controlled; dominates modern production
Adaptive cutting (自适应切削) – sensors adjust parameters in real time based on load, vibration, tool wear
7. By Machining Environment & Assistance (按辅助条件)
High-speed cutting (高速切削) – speeds 2–10× conventional; light, fast, small chip load
Heavy cutting (强力切削) – large depth and feed; high rigidity machine required
Hard machining (硬态切削) – cutting hardened steel (45–65 HRC) with CBN/ceramic tools, replacing grinding
Vibration-assisted cutting (振动辅助切削) – ultrasonic vibration superimposed; for hard/brittle materials
Laser-assisted cutting (激光辅助切削) – local preheating softens material, extends tool life
8. By Production Organization (按生产组织方式)
Job-shop cutting – single-piece, universal machines, skilled operators
Batch cutting – small-to-medium lots, CNC machines, quick changeover
Mass-production cutting – dedicated lines, automatic lathes, FMS (flexible manufacturing systems), robotic loading
9. Chip Control Modes (断屑方式)
Effective chip breaking is a key part of process planning:
Natural chip breaking – material brittleness or high feed creates segmented chips
Chip-breaker geometry – grooves/steps on the rake face curl and break the chip
Interrupted cutting – periodic tool withdrawal breaks chips
High-pressure coolant – jet breaks chips and improves chip evacuation in deep-hole and turning operations
Summary: Selecting the Right Method
| If you need... | Choose... |
|---|
| Maximum metal removal | Roughing, heavy cutting |
| Best surface & accuracy | Finish turning/milling + grinding |
| Thin-walled parts, less vibration | Climb milling, sharp tools, light passes |
| Green & low cost | Dry cutting / MQL |
| Complex parts in one clamping | Turn-mill compound / 5-axis |
| Mass production of small parts | Swiss-type automatic lathes, multi-tool cutting |










