Home > News > Content

Analysis Of Modern Control Technology Of Machine Tool

Dec 26, 2024

Analysis of Modern Control Technology in Machine Tools

Machine tools combine the speed of modern control technology with the precision of machine motion to form a true constant-speed machining system. The control system of the machine tool can become an obstacle to shortening the machining cycle, improving the surface finish of complex 3D models, aerospace parts, or medical device components. When the processor cannot keep up with the speed of the program, the drive will slow down the feed rate of the tool due to the urgent need for information, thus extending the machining cycle and causing the tool to operate out of coordination. To replace worn and overloaded tools, in addition to increasing the number of tool-to-tool library runs, it also affects the effective utilization rate of the spindle, increases the workload of fitters, and the time for finishing work.

When the speed (feed rate) is unstable, it can cause problems. As the tool moves through the part during machining, its uneven motion can cause different loads on the cutting slots of the tool, thereby affecting machining accuracy and surface finish. If the tool's operating speed is not fast enough to maintain the minimum cutting load of the tool, friction rather than cutting will occur between the tool and the workpiece, and the unstable motion of the tool will shorten the tool's service life. Such operation can also cause minor notches on the cutting edge, causing the tool to heat up and become dull. However, by adopting constant-speed machining, the average machining speed of the tool through the workpiece will be more uniform, the machining accuracy will be higher, and not only can the machining time be shortened, but the service life of the tool can also be extended.

In the "revolutionary" series of machining centers, the control system does not generate excessive stress related to high-speed machining, allowing fluid tools to operate and machine complex part geometries.

During the execution of the program, the use of high-speed program segments results in stable monitoring and adjustment of the control system's random errors, allowing the tool to operate at a uniform speed and achieve perfect surface integrity. The system uses more than 80 high-speed buffers to monitor the tool's operation, and if the random error is exceeded, the tool's motion can be immediately adjusted.

Even when machining very complex shapes, it is said that the speed of the control system, the fine-tuning of the drive, and the processing of the tool path can achieve the goal of fast and precise program execution.

Send Inquiry