Classification of Bolts
Bolts are classified according to multiple criteria including head style, drive type, thread specification, material properties, and intended application. The following presents the major classification systems used in engineering and manufacturing.
1. Classification by Head Style
The head configuration determines the tool engagement method, bearing surface geometry, and aesthetic characteristics.
表格
| Head Type | Description | Typical Applications |
|---|---|---|
| Hex head | Six-sided head with flat bearing surface; most common bolt type | General construction, machinery, automotive |
| Square head | Four-sided head; provides large wrenching area | Heavy construction, structural steel |
| Round head | Domed cylindrical head; smooth appearance | Decorative applications, limited access |
| Countersunk (Flat) head | Tapered head that sits flush with or below the surface | Aerospace, applications requiring smooth surfaces |
| Button head | Low-profile rounded head with internal drive | Machinery guards, aesthetic applications |
| Carriage bolt | Round head with square neck beneath; prevents rotation during tightening | Wood construction, dock building |
| Flange head | Integral washer-like flange beneath the head; distributes clamping load | Automotive, high-vibration applications |
| 12-Point head | Double-hex configuration; provides multiple wrenching angles | Aerospace, critical space-limited assemblies |
2. Classification by Drive Type
The drive system determines the tool interface and torque transmission efficiency.
表格
| Drive Type | Description | Characteristics |
|---|---|---|
| External hex | Conventional six-sided head; wrench or socket engagement | High torque capacity; widely available tools |
| Internal hex (Allen) | Hexagonal recess in the head; Allen key engagement | Compact head design; suitable for counterbored holes |
| Torx | Six-lobe star-shaped recess; resists cam-out | High torque transfer; reduced tool wear |
| Phillips | Cross-shaped recess; self-centering | Common in smaller fasteners; prone to cam-out at high torque |
| Slotted | Single straight slot; flat-blade screwdriver | Simple but prone to cam-out; limited torque capacity |
| Robertson (Square) | Square recess; positive tool engagement | Popular in Canadian construction; resists stripping |
| Spline | Multiple longitudinal grooves; high torque capacity | Aerospace and heavy machinery applications |
3. Classification by Thread Specification
Thread geometry is standardized to ensure interchangeability and proper mechanical performance.
表格
| Criterion | Classification | Description |
|---|---|---|
| Thread profile | Unified/ISO metric | 60° V-thread; standard for general applications |
| Acme | Trapezoidal thread; used for power transmission and lead screws | |
| Buttress | Asymmetric profile; high unidirectional load capacity | |
| Square | Square profile; high efficiency power transmission (rare in bolts) | |
| Thread pitch | Coarse thread | Larger pitch; greater resistance to stripping; general purpose |
| Fine thread | Smaller pitch; higher tensile stress area; better vibration resistance | |
| Extra-fine thread | Very small pitch; used in thin-walled components and precision instruments | |
| Thread series | UNC (Unified Coarse) | Standard coarse series; general industrial applications |
| UNF (Unified Fine) | Fine series; improved fatigue resistance and adjustment capability | |
| UNEF (Unified Extra Fine) | Extra fine series; thin materials and precision assemblies | |
| Metric coarse (M) | Standard ISO metric threads; international standard | |
| Metric fine (MF) | Fine pitch metric threads; high-strength applications |
4. Classification by Material and Mechanical Properties
Material selection determines strength, corrosion resistance, temperature capability, and cost.
表格
| Grade/Property Class | Material | Tensile Strength | Typical Applications |
|---|---|---|---|
| Grade 2 / Class 4.8 | Low/medium carbon steel | 74,000 psi / 420 MPa | General purpose; non-critical applications |
| Grade 5 / Class 8.8 | Medium carbon steel, quenched and tempered | 120,000 psi / 800 MPa | Automotive, machinery; most common grade |
| Grade 8 / Class 10.9 | Medium carbon alloy steel, quenched and tempered | 150,000 psi / 1,040 MPa | Heavy machinery, critical structural connections |
| Class 12.9 | Alloy steel, quenched and tempered | 1,220 MPa | High-strength applications; limited ductility |
| A2-70 / A4-70 | Austenitic stainless steel (304/316) | 700 MPa | Corrosion-resistant environments; marine, chemical |
| A2-80 / A4-80 | Austenitic stainless steel, cold worked | 800 MPa | Higher strength corrosion-resistant applications |
| B8 / B8M | Stainless steel (ASTM A193) | Varies by class | High-temperature pressure vessel applications |
| Titanium (Gr 5 Ti-6Al-4V) | Titanium alloy | 950 MPa | Aerospace, lightweight critical applications |
5. Classification by Application and Function
表格
| Category | Description | Examples |
|---|---|---|
| Structural bolts | High-strength bolts for steel frame construction; designed to withstand shear and tension | ASTM A325, A490; EN 14399 |
| Machine bolts | General-purpose bolts for machinery assembly | Hex head, square head bolts |
| Anchor bolts | Embedded in concrete or masonry to secure structures to foundations | J-bolts, L-bolts, wedge anchors |
| Lag bolts (Lag screws) | Large wood screws with hex heads; used in timber construction | Coach screws, timber bolts |
| U-bolts | U-shaped bolts with threaded ends; used to secure pipes and round objects | Pipe supports, automotive leaf springs |
| Eye bolts | Head formed into a loop; used for lifting and rigging | Machinery lifting points, theatrical rigging |
| Toggle bolts | Spring-loaded wings that expand behind hollow walls; used in drywall and hollow masonry | Hollow wall anchors |
| Expansion bolts | Mechanically expand to grip the base material; used in concrete and stone | Sleeve anchors, wedge anchors |
| Tension control bolts | High-strength structural bolts with splined ends that shear off at proper preload | Twist-off bolts; used in steel construction |
6. Classification by Surface Finish and Coating
表格
| Finish/Coating | Description | Purpose |
|---|---|---|
| Plain (uncoated) | No surface treatment; bare steel | Low-corrosion environments; immediate use |
| Zinc plated (electroplated) | Thin zinc layer via electrolysis | General corrosion protection; economical |
| Hot-dip galvanized | Thick zinc layer from molten zinc bath | Heavy-duty outdoor corrosion protection |
| Mechanically galvanized | Zinc particles cold-welded to surface | Corrosion protection without hydrogen embrittlement risk |
| Zinc-aluminum flake (Geomet/Dacromet) | Inorganic zinc-aluminum coating | Superior corrosion resistance; no hydrogen embrittlement |
| Phosphate coated | Crystalline phosphate conversion layer | Paint adhesion base; moderate corrosion protection |
| Black oxide | Chemically formed Fe₃O₄ layer | Minimal corrosion resistance; aesthetic; reduced glare |
| PTFE coated | Polytetrafluoroethylene polymer layer | Low friction; chemical resistance; thread lubrication |
7. Classification by Manufacturing Method
表格
| Method | Description | Characteristics |
|---|---|---|
| Cold formed (cold headed) | Formed at room temperature from wire | Grain flow follows contour; superior fatigue resistance; economical for high volume |
| Hot forged | Formed at elevated temperatures | Larger sizes; reduced work hardening; coarser grain structure |
| Machined (cut from bar) | Turned from solid bar stock | Suitable for small quantities; no grain flow; higher cost |
| Rolled threads | Threads formed by plastic deformation | Work-hardened surface; compressive residual stresses; superior fatigue life |
| Cut threads | Threads machined by cutting or grinding | Precise geometry; no work hardening; lower fatigue resistance |










