Home > Blog > Content

How to measure the surface integrity of machined titanium parts?

Jun 25, 2025

As a reputable titanium machining supplier, we understand the critical importance of surface integrity in machined titanium parts. Surface integrity refers to the quality and characteristics of the surface layer of a machined part, which can significantly impact its performance, durability, and functionality. In this blog post, we will explore various methods and techniques for measuring the surface integrity of machined titanium parts, providing valuable insights for manufacturers and engineers alike.

Understanding Surface Integrity in Titanium Machining

Before delving into the measurement techniques, it is essential to understand the key aspects of surface integrity in titanium machining. Titanium is a highly reactive metal, and the machining process can introduce various surface defects, such as residual stresses, microcracks, and changes in the material's microstructure. These defects can affect the part's fatigue life, corrosion resistance, and mechanical properties, making it crucial to assess and control the surface integrity during the machining process.

The surface integrity of machined titanium parts can be characterized by several parameters, including surface roughness, hardness, residual stress, and microstructure. Surface roughness refers to the irregularities on the surface of the part, which can affect its friction, wear, and sealing properties. Hardness is a measure of the material's resistance to indentation or deformation, and changes in hardness can indicate the presence of surface hardening or softening. Residual stress is the stress that remains in the material after the machining process, and it can have a significant impact on the part's dimensional stability and fatigue life. Microstructure refers to the arrangement and morphology of the material's grains, and changes in microstructure can affect the part's mechanical properties and corrosion resistance.

Measuring Surface Roughness

Surface roughness is one of the most commonly measured parameters in surface integrity assessment. It can be measured using various techniques, including contact and non-contact methods. Contact methods involve the use of a stylus that traverses the surface of the part, measuring the height variations of the surface irregularities. Non-contact methods, on the other hand, use optical or laser-based techniques to measure the surface topography without physically contacting the part.

One of the most widely used contact methods for measuring surface roughness is the profilometer. A profilometer consists of a stylus that is dragged across the surface of the part, and the vertical displacement of the stylus is recorded as a function of the horizontal distance. The profilometer can provide detailed information about the surface roughness, including the average roughness (Ra), the root mean square roughness (Rq), and the maximum peak-to-valley height (Rz).

Non-contact methods for measuring surface roughness include optical profilometry and laser scanning confocal microscopy. Optical profilometry uses a light source to illuminate the surface of the part, and the reflected light is analyzed to determine the surface topography. Laser scanning confocal microscopy uses a laser beam to scan the surface of the part, and the reflected light is detected by a confocal microscope to create a three-dimensional image of the surface. These non-contact methods offer several advantages over contact methods, including higher resolution, faster measurement times, and the ability to measure complex surfaces.

Measuring Hardness

Hardness is another important parameter in surface integrity assessment. It can be measured using various techniques, including indentation and non-destructive methods. Indentation methods involve the use of a hard indenter that is pressed into the surface of the part, and the size of the indentation is measured to determine the hardness. Non-destructive methods, on the other hand, use techniques such as ultrasonic testing or eddy current testing to measure the hardness without causing any damage to the part.

One of the most widely used indentation methods for measuring hardness is the Vickers hardness test. In the Vickers hardness test, a square-based pyramid indenter is pressed into the surface of the part under a specified load, and the size of the indentation is measured using a microscope. The Vickers hardness number (HV) is calculated based on the load and the size of the indentation.

Non-destructive methods for measuring hardness include ultrasonic hardness testing and eddy current hardness testing. Ultrasonic hardness testing uses an ultrasonic wave to measure the hardness of the material based on the change in the velocity of the wave. Eddy current hardness testing uses an alternating magnetic field to induce eddy currents in the material, and the change in the impedance of the eddy currents is measured to determine the hardness. These non-destructive methods offer several advantages over indentation methods, including the ability to measure hardness in small or inaccessible areas and the ability to measure hardness without causing any damage to the part.

Measuring Residual Stress

Residual stress is a critical parameter in surface integrity assessment, as it can have a significant impact on the part's dimensional stability and fatigue life. Residual stress can be measured using various techniques, including destructive and non-destructive methods. Destructive methods involve the removal of a small section of the material, and the resulting stress relaxation is measured to determine the residual stress. Non-destructive methods, on the other hand, use techniques such as X-ray diffraction or neutron diffraction to measure the residual stress without causing any damage to the part.

One of the most widely used non-destructive methods for measuring residual stress is X-ray diffraction. X-ray diffraction uses an X-ray beam to diffract off the crystal lattice of the material, and the resulting diffraction pattern is analyzed to determine the lattice spacing and the residual stress. X-ray diffraction can provide detailed information about the residual stress, including the magnitude, direction, and distribution of the stress.

Another non-destructive method for measuring residual stress is neutron diffraction. Neutron diffraction uses a neutron beam to diffract off the crystal lattice of the material, and the resulting diffraction pattern is analyzed to determine the lattice spacing and the residual stress. Neutron diffraction offers several advantages over X-ray diffraction, including the ability to measure residual stress in thick or large parts and the ability to measure residual stress in the interior of the material.

5TC4

Measuring Microstructure

Microstructure is an important parameter in surface integrity assessment, as it can affect the part's mechanical properties and corrosion resistance. Microstructure can be measured using various techniques, including optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Optical microscopy uses a light microscope to observe the microstructure of the material at low magnification, while SEM and TEM use electron beams to observe the microstructure at high magnification.

One of the most widely used techniques for measuring microstructure is optical microscopy. Optical microscopy can provide detailed information about the grain size, shape, and orientation of the material, as well as the presence of any defects or inclusions. SEM and TEM offer higher resolution than optical microscopy, allowing for the observation of the material's microstructure at the nanoscale. SEM can provide detailed information about the surface morphology of the material, while TEM can provide detailed information about the internal structure of the material.

Conclusion

In conclusion, measuring the surface integrity of machined titanium parts is essential for ensuring their performance, durability, and functionality. By using a combination of techniques for measuring surface roughness, hardness, residual stress, and microstructure, manufacturers and engineers can gain a comprehensive understanding of the surface integrity of the parts and take appropriate measures to improve it. As a titanium machining supplier, we are committed to providing high-quality machined titanium parts with excellent surface integrity. We use advanced measurement techniques and quality control processes to ensure that our parts meet the highest standards of quality and performance.

If you are interested in Titanium CNC Turning Parts or Titanium CNC Milling Parts, please feel free to contact us for more information. We would be happy to discuss your specific requirements and provide you with a customized solution.

References

  1. ASTM E 384 - 17, Standard Test Method for Knoop and Vickers Hardness of Materials.
  2. ISO 4287:1997, Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters.
  3. Noyan, I. C., & Cohen, J. B. (1987). Residual stress: measurement by diffraction and interpretation. Springer Science & Business Media.
  4. Vander Voort, G. F. (2004). Metallography: principles and practice. McGraw-Hill Education.
Send Inquiry
Tom Zhang
Tom Zhang
Tom leads the purchasing department at Nanjing Morong Machinery Technology, where he sources raw materials and components for our manufacturing processes. His knowledge of global markets helps us maintain competitive costs.
Contact Us